Sludge Dewatering Press

VOLUTETM Dewatering Press without Sludge Conditioning Tank (GS Series)

1Flow Control Tank
Sludge Conditioning Tank

Sludge feed is regulated with the overflow pipe, returning excess volume to the sludge storage tank.

2Thickening Flocculation Tank
Sludge Conditioning Tank

Polymer flocculant and sludge are stirred and mixed, forming floc suitable for VOLUTETM. Then, the built-in thickener in the tank instantly thicken the sludge.

3Cylinder Unit
Cylinder Unit

Sludge is further thickened in the thickening zone of the cylinder, and then the inner pressure increased at the dewatering zone helps sludge being dewatered well.

4Discharge Outlet for Dewatered Cake
Discharge Outlet for Dewatered Cake

Further pressure is applied from the outlet side with the End Plate, discharging dewatered cake with 20±5% solids content.

VOLUTETM without Sludge Conditioning Tank (FS Series)

1Flow Control Tank
Flow Control Tank

Sludge feed is regulated with the overflow pipe, returning excess volume to the sludge conditioning tank.

2Flocculation Tank
Flocculation Tank

Polymer and sludge are stirred and mixed, forming flocks suitable for VOLUTETM.

3Cylinder Unit
Cylinder Unit

Sludge is instantly thickened at the thickening zone in the precedent stage, and dewatered at the dewatering zone in the subsequent stage under increasing inner pressure.

4Discharge Outlet
for the Dewatered
Cake
Discharge Outlet for the Dewatered Cake

Further pressure is applied from the outlet side with the End Plate, discharging dewatered cake with 20±5% dry solid content.

VOLUTETM Dewatering Press with Sludge Conditioning Tank (EC Series)

1Sludge Conditioning Tank
Sludge Conditioning Tank

A sludge conditioning tank temporarily stores sludge before it is dewatered. The model with a sludge conditioning tank realizes a high solid capture rate higher than 95%. When required, the conditioning tank can be used as a reactor tank for inorganic flocculant.

2Flow Control Tank
Flow Control Tank

Sludge feed is regulated with the overflow pipe, returning excess volume to the sludge conditioning tank.

3Flocculation Tank
Flocculation Tank

Polymer and sludge are stirred and mixed, forming flocks suitable for VOLUTETM.

4Cylinder Unit
Cylinder Unit

Sludge is instantly thickened at the thickening zone in the precedent stage, and dewatered at the dewatering zone in the subsequent stage under increasing inner pressure.

5Discharge Outlet
for the Dewatered
Cake
Discharge Outlet for the Dewatered Cake

Further pressure is applied from the outlet side with the End Plate, discharging dewatered cake with 20±5% solid content.

1Thickening Flocculation tank
Thickening Flocculation tank

Polymer flocculant and sludge are stirred and mixed, forming floccs suitable for VOLUTE™. Then, the built- in thickener in the tank instantly thicken the sludge.

2Reactor Tank for Inorganic Flocculation
Reactor Tank for Inorganic Flocculation)

Inorganic flocculant is added to the concentrated sludge, and mixed in this tank.

3Cylinder unit
Cylinder unit

Sludge is further thickened in the thickening zone of the cylinder, and then the inner pressure increased at the dewatering zone helps sludge being dewatered well.

4Discharge outlet for Dewatering cake
Discharge outlet for Dewatering cake

Further pressure is applied from the outlet side with the End Plate, discharging dewatered cake with around 30% dry solids content.

1Automatic screen
Automatic screen

The screen removes the impurities such as hair, plastic, and others which are contained in the sludge.

2Sludge Conditioning Tank
Sludge Conditioning Tank

A sludge conditioning tank temporarily stores sludge before it is dewatered. The model with a sludge conditioning tank realizes a high solid capture rate higher than 95%. When required, the conditioning tank can be used as a reactor tank for inorganic flocculant.

3Pre-Reactor Tank for inorganic flocculant
Pre-Reactor Tank for inorganic flocculant

Inorganic flocculant is added to the sludge which is supplied from the Sludge Conditioning Tank, and mixed in this tank.

4Thickening Flocculation Tank
Thickening Flocculation Tank

Polymer flocculant and sludge are stirred and mixed, forming floccs suitable for VOLUTE™. Then, the built- in thickener in the tank instantly thicken the sludge.

5After-Reactor tank for inorganic flocculant
After-Reactor tank for inorganic flocculant

Inorganic flocculant is added to the concentrated sludge, and mixed in this tank.

6Cylinder unit
Cylinder unit

Sludge is further thickened in the thickening zone of the cylinder, and then the inner pressure increased at the dewatering zone helps sludge being dewatered well.

7Discharge Outlet for Dewatered Cake

Further pressure is applied from the outlet side with the End Plate, discharging dewatered cake with better than 17% dry solids content.

※VOLUTETM is a trademark of AMCON products.

日本全国・海外も対応いたします!汚泥処理、排水処理に
関することなら何でもお気軽にご相談・お問い合わせください。

機械製品
に関するお問い合わせ

  • 汚泥脱水機/濃縮機
  • 汚泥乾燥機/汚泥脱水発酵システム
  • 水処理薬品
  • その他の製品

お電話でのお問い合わせ

045-540-8581

[受付時間]平日9:00~17:00

機械製品の操作・修理・故障
に関するお問い合わせ

  • 汚泥脱水機/濃縮機
  • 汚泥乾燥機/汚泥脱水発酵システム
  • 水処理薬品
  • その他の製品

お電話でのお問い合わせ

045-540-8582

[受付時間]平日9:00~17:00

「ヴァルート」及び「VOLUTE」はアムコン株式会社の登録商標です。
上へ